computermagazine

Tips to Make Your Mac Start When It Refuses to

No machine is immune to problems and your Mac isn’t an exception. Sometimes, your Mac may simply not start when you press the power button. Sometimes, it may have crashed or not shut down properly. Then again, you would find it difficult to turn on your Mac. If you are struggling with any of these problems, this article will help you fix your PC. There are several ways to perform Mac repair in Toronto.

Mac Repair in Toronto

  • Plug your Mac to a power source

Make sure that you have plugged your Mac to a power source. If the battery is dead, you will have to wait for some time before the system powers up. If you do not notice any change, use another charger, try using a different power cable or switch the power outlet. After some time, check if the PC responds to the power button.

  • Perform a hardware check

This is for desktop users. Check if all the cables are seated properly. To be on the safer side, unplug the cables and plug them back in securely into the right ports.

If you tried to change a thing or two in the hardware, that may be the root cause of the problem. If you inserted any new parts, try swapping them to the old parts.

If nothing works, disconnect the unnecessary peripherals and try booting your Mac. If you do not want to experiment with different solutions, look up online for places that deal with Mac repair in Toronto.

Mac Repair in Toronto

  • The power-cycle

If the power button press is met with no response, one of the solutions is to cut its power supply and to perform a forced restart.

If you are using a modern MacBook with non – removable battery, then press power button for about 10 seconds. The process ensures that the power is cut to it and forcibly restarts your system.

If you are using a desktop, the power cable should be unplugged and then plugged back in after ten seconds.

If your Mac has a removable battery, remove the battery after shutting down the system. Unplug your Mac. Wait for some seconds and insert the battery again. This should fix your issue.

  • Try resetting the System Management Control Firmware

If none of the above-mentioned steps work, this is your last resort.

Desktop users unplug the power cord and plug it back in after a gap of fifteen seconds. Now, wait for five more seconds and then check whether the system responds to the power button press.

Mac Repair in Toronto

If you use a MacBook with a removable battery:

  • Cut off power source.
  • Remove the battery
  • Press the power button for 5 seconds
  • Then, release it and place the battery back
  • Plug in the Mac to a power source

Now, you should be able to start up your system after pressing the power button.

For modern MacBook users:

  • Plug in the Mac to a power source
  • Press and hold the power key and shift+control+option keys together
  • Release all the keys and press the power button to switch on your Mac

If the issue still cannot be resolved, try using disk utility from recovery mode or recovering from recovery mode – the directions to both are available on numerous sites/videos online. The final option is to take your PC to a local Apple store that performs mac repair in Toronto.

Leave a Reply

Your email address will not be published.

Show Buttons
Hide Buttons
Scroll To Top